【Power Cable Set for iCELL B12A｜Mounting Parts to Arrange Parking Surveillance for a Drive Recorder】

If you want to use parking surveillance with a dash cam, how you tap power from the vehicle and how you manage the wiring are important.

This Power Cable Set for iCELL B12A is a mounting cable used to connect the parking-surveillance auxiliary battery “iCELL B12A” to your vehicle. Instead of continuing to place a direct load on the dash cam itself, pairing it with a dedicated auxiliary battery is ideal for those who want to use parking surveillance for long periods after the engine is turned off.

iCELL B12A supports up to about 70 hours of parking surveillance when used in combination with a compatible dash cam. The charging time for the unit is about 50 minutes, and it can be used with various dash cams that support 2-wire or 3-wire connections.

However, the actual installation method varies depending on the vehicle model and the dash cam specifications. This is also the part where differences in appearance and usability will show unless you confirm the power tapping location, how the wiring is routed, and how it relates to existing electrical components.

At LOGON, we guide you to a realistic, hassle-free installation method after checking the combination of the iCELL B12A unit and the dash cam, the vehicle-side specifications, and how you normally use your car. So that you don’t end up having to change the wiring or installation details later, I would first review the vehicle and the devices together before proceeding.

If you’d like to install the iCELL B12A or want to use your dash cam’s parking surveillance for longer, please contact us with your vehicle model/type and the dash cam you are currently using.

Shop Owner Komizo