CLASSIC MK II IC (2.65m)
An interconnect cable that delivers the details of your music, together with silence.
【CLASSIC MK II IC (2.65m) RCA Audio Cable】
As you fine-tune the sound in a car audio system, you start to notice not only the speakers and amplifiers, but also the RCA cables that connect the components together. CLASSIC MK II IC is a 2.65m RCA audio cable designed to transmit signals as accurately as possible.
It uses the patented technology SASDB®, which suppresses dielectric losses through a proprietary insulating material. In addition, CAFPE® with vibration-absorbing properties is used in a 2-layer structure. The design aims to minimize changes in the dielectric constant with frequency, enabling stable transmission of music signals.
In car audio installations, how you route and mount the RCA cables is also an important factor that affects the final result. Forcing cables that don’t match the required length, or letting them interfere with other wiring, can prevent you from fully benefiting from your system setup. Because the cable jacket is made with SPVC, known for its excellent flexibility, it is also designed with in-car routing and vibration loads in mind.
If I were choosing, I would consider the entire current system—such as the head unit, DSP, and amplifier—before deciding, rather than replacing only the cable by itself. Even with the same cable, your approach can differ depending on where you use it and how you route it. This RCA cable is recommended for those who want to carefully optimize the system’s original signal transmission, rather than making sudden, dramatic changes to the sound.
Main Specifications / Specs
【Basic Information】
Product name: CLASSIC MK II IC
Type: RCA audio cable
Cable length: 2.65m
【Adopted Technologies / Materials】
Signal transmission technology: SASDB®
Insulation material: CAFPE® 2-layer structure
Cable jacket: SPVC
Features: Reduced dielectric loss, consideration for vibration load, structure designed with flexibility in mind
| Cable Type | RCA line-level interconnect cable (unbalanced) |
| Conductor Construction | 2 BRC copper stranded conductors, 2×0.50 mm² cross-section each |
| Connector Type | Classic V2 RCA plugs (beryllium-copper base, 24K gold-plated, collet-chuck design) |
| Shielding | Braided BRC copper shield (over 90% coverage) with patented SASDB® anti-vibration construction |
| Product Line | Part of the Tchernov Cable "Classic Mk II" series (an XLR version is also offered in the same line) |
| Length Options | Offered in multiple stereo-pair lengths, including 0.62m, 1.0m, 1.65m, 2.65m, 4.35m and 5.0m |
| Material & Features | Dual-layer CAFPE® insulation with patented SASDB® technology to reduce dielectric loss; signature purple SPVC jacket; 110Ω impedance |