SLA-500 (1.8m)
Connect every detail of the signal carefully, and bring out the character of your beloved car’s sound.
【SAEC SLA-500 (1.8m) Audio LAN Cable】
Even the LAN cables used to connect audio equipment are an important part when considering the overall finishing of the system.
SLA-500 (1.8m) is an audio LAN cable developed through a joint effort by SAEC and SUPRA. It features a dual shield made with an aluminum foil and a braided mesh, designed with consideration for the effects of noise.
It is also suitable for DRC connections with Audison equipment, and you can choose it according to your in-vehicle system configuration. Rather than deciding based on the cable alone, let’s work with LOGON to consider the best combination while also checking the status of your equipment and wiring.
| Cable Type | Audio-grade LAN cable (Category 6 compliant) |
| Conductor | OFC copper, AWG26/7 (7-strand), conductor cross-section 0.13 sq mm |
| Shielding | Dual shielding: aluminum foil shield plus tin-plated copper braid shield |
| Impedance | 100Ω (impedance-matched design) |
| Transmission Bandwidth | Supports transmission bandwidth up to 1300MHz |
| Cable Outer Diameter | Approx. φ7.1mm |
| Intended Use | For LAN-based digital audio transmission between network players, NAS, and similar devices |
| Length Options | Available in six lengths: 0.3m / 0.7m / 1.2m / 1.8m / 3.0m / 4.0m (same series, different lengths) |