【PORMID PRD80C OEM Replacement Drive Recorder｜In-Cabin Rear Camera Specification】

The PORMID PRD80C OEM Replacement Drive Recorder is for those who want to record both front and rear footage properly without significantly changing the look of the OEM mirror.

Unlike typical mirror-style dash cams that are added to the OEM mirror, this unit is installed as an OEM mirror replacement type using vehicle-specific mounting brackets. The wiring can also be bundled more easily into a single line, aiming for a clean finish with minimal “aftermarket” appearance.

Make daily recordings easy to view with front and rear cameras

The front camera supports 2K resolution, and the rear camera supports 1080P Full HD. In addition to simultaneous front-and-rear recording, the Sony-made sensor, Starvis, and HDR/WDR functions make it easier to check footage not only in daytime but also at night or in scenes with strong differences in brightness.

The rear camera is a separable type installed inside the cabin and features a smoke-correction function. Even if you are concerned about how well the rear view shows, you can adjust the brightness and display on the screen for easier use. It also supports a zoom function, making it suitable for those who prioritize easy rear checking.

The unit uses a bright 600cd/m² IPS display. With a wide viewing angle, it is also easy to use as a digital mirror for checking the rear while driving day to day.

Also supports recording while parked

The parking monitoring function supports time-lapse recording and impact-detection recording. It is useful for those who want to keep footage while the vehicle is parked, and it also includes a battery protection function.

However, how you use parking monitoring will vary depending on how frequently the vehicle is used, the condition of the battery, and how power is supplied. If you place importance on parking monitoring, it is important not to decide based only on the features, but to confirm the installation method as well to match your usual driving and parking habits.

Checking the vehicle-specific mounting bracket is important

The PRD80C is not a product that can be installed as-is using only the dash cam main unit. You will need vehicle-specific mounting brackets, brackets, arms, etc.

In some cases, the included PR001 may be usable, but the compatible bracket may differ depending on the vehicle’s model year, model type, and whether it has a safety sensor. For some vehicle models, an additional bracket may be required, so you should confirm your vehicle information before purchasing.

At LogOn, we check not only the compatibility, but also how the unit fits around the mirror, the front camera’s field of view, the relationship with the safety sensor, and even how the wiring is handled. Even with the same product, the appearance and ease of use will change depending on which bracket is used and how it is installed.

If you want a clean, OEM-like finish or want to choose a digital mirror with minimal “aftermarket” feel, let’s decide the direction together while confirming the vehicle type, model, and model year. If it were me, I would start by confirming the compatible mounting bracket first.

Main specifications / specs

【Basic Information】
・Product name: PORMID PRD80C
・Type: OEM replacement drive recorder
・Rear camera specification: In-cabin rear camera
・Display: IPS display
・Display brightness: 600cd/m²

【Camera / Recording】
・Front camera: 2K
・Rear camera: 1080P Full HD
・Recording method: Simultaneous front-and-rear recording
・Image sensor: Sony-made sensor
・Night vision: Starvis
・Image correction: HDR / WDR
・Front camera: Separable type
・Rear camera: Separable type
・Rear camera functions: Smoke correction, Zoom function

【Parking Monitoring】
・Parking monitoring: Supported
・Recording method: Time-lapse recording, Impact-detection recording
・Parking monitoring time: Up to 72 hours
・Battery protection function: Yes

【Main Features】
・Back-linked function
・Flip screen vertically (up/down)
・Switch between normal image / mirror image
・Built-in GPS
・Supports LED traffic signals
・Countermeasures for radio wave interference
・Cold-, heat-, and shock-resistant design

【Installation / Compatibility】
・OEM mirror replacement type
・Vehicle-specific mounting bracket required
・Included accessories: PR001
・Compatible brackets may vary depending on model year, model type, and presence/absence of safety sensors
・If the included bracket does not fit, an additional bracket is required

We provide guidance on vehicle compatibility and mounting brackets after confirming the vehicle type, model, and model year. If you want to prioritize both appearance and ease of use, please don’t decide based on the product alone—consult us including the installation process as well.