【Morel MXT380C｜Passive Crossover for Elate Carbon 3-Way】

Morel MXT380C is a passive crossover designed exclusively for the 3-way system of the Elate Carbon series.

By properly splitting the signals sent to the woofer, midrange, and tweeter, you can organize the frequency bands handled by each speaker and aim for the natural sound integration that 3-way systems are known for. When the distribution of the frequency ranges is well-balanced, the position of vocals and the overlap of instruments become easier to discern, making it easier to build a system that sounds good not only at higher volume, but also at everyday listening levels.

The crossover frequencies are 450 Hz and 2,700 Hz. In addition, the tweeter supports level adjustment of ±2 dB, and the midrange supports -2 dB. Since you can fine-tune to match the acoustical characteristics inside the vehicle and the speaker installation conditions, it’s important not just to install it, but to finalize the setup while listening and checking the sound in your actual car.

Built to support bi-amping, it uses high-quality audio components. This network is designed to bring out the performance of the Elate Carbon series, targeting low-distortion, high-resolution playback.

A passive crossover isn’t an eye-catching part, but it is an important element that strongly influences how well the entire 3-way system comes together sonically. Because the way it sounds can vary depending on the vehicle model, the speaker mounting positions, and the amplifier configuration, I wouldn’t judge the setup based on the MXT380C alone—I’d consider the combination including the speakers, the amps, and the installation method.

At LOGON, we guide you toward a configuration that makes the most of the performance without strain, by confirming your current system, how you use it in your car, and the music you listen to most often. If you want to build a 3-way system with the Elate Carbon series, or if you want to carefully tune the sound integration, let’s decide the direction together based on your vehicle.

Key Specifications / Specs

【Basic Information】
Product name: MXT380C
Brand: Morel
Type: Passive crossover for 3-way systems, dedicated to the Elate Carbon series

【Crossover】
Crossover frequencies: 450 Hz / 2,700 Hz
Compatible system: 3-way configuration with woofer, midrange, and tweeter

【Level Adjustment】
Tweeter: ±2 dB
Midrange: -2 dB

【Connections / Structure】
Bi-amp compatible: Yes
Used components: High-quality audio parts
Design: Low-distortion / high-resolution design