【Morel Elate Carbon MM3｜3.5-inch Mid-Range Speaker】

Vocals feel a little too far away, the sound lacks thickness, and the connection between the tweeter and the door speakers doesn’t quite come together.

For those kinds of concerns, the Morel Elate Carbon MM3 is a dedicated mid-range speaker that handles the mid frequencies in a 3-way system. With a manageable 3.5-inch size, it clearly renders the character of vocals and acoustic instruments, adding a natural sense of thickness to the center of the sound.

Thanks to a three-layer cone structure combining carbon fiber and Rohacell, it achieves both light weight and rigidity. The sound’s attack is less prone to becoming muddy, making fine vocal nuances and the lingering reverb of instruments clean and easy to hear.

In particular, it’s a great match if you want to bring vocals forward or if you’d like to shape the depth of the sound with a front 3-way setup. Since the low end can be reproduced from 90Hz, it can work in system configurations designed with seamless transitions in mind—despite being a mid-range-only speaker.

However, the final result for a mid-range speaker can vary significantly depending on the installation location and angle, surrounding reflections, and the crossover settings with the tweeters and door speakers. It’s important not only to consider the speaker’s performance by itself, but also to think about how it will sound inside the vehicle.

At LOGON, we check the installation method and the overall balance of the system based on the vehicle model, factory system, your current speaker configuration, and the music you typically listen to. If it were me adding the Elate Carbon MM3, I would first look at how it integrates with the other speakers, and then make the necessary adjustments to the parts that need it.

This is also a speaker you should try if you want stronger midrange but don’t want a sound where only the vocals stand out. Let’s take a look together at how the vocals and instruments from your usual tracks will change, and consider a configuration that’s practical and well-balanced.

Main Specifications

【Basic Information】

• Product name: Elate Carbon MM3
• Manufacturer: Morel
• Series: Elate Carbon
• Type: 3.5-inch mid-range speaker

【Performance】

• Cone diameter: 3.5 inches (approx. 89mm)
• Rated input (RMS): 120W
• Maximum input (peak): 400W
• Reproduction frequency range: 90Hz to 6kHz
• Impedance: 4Ω
• Sensitivity: 87dB (2.83V/1m)

【Key Construction】

• Voice coil diameter: 2.1 inches (approx. 53mm)
• Motor structure: EVC (External Voice Coil)
• Magnet: Neodymium
• Cone material: Triple-layer carbon fiber / Rohacell

【Mounting Dimensions】

• Mounting hole diameter: approx. 84mm
• Mounting depth: approx. 38mm

【Recommended Crossover】

• High-pass: 450Hz and above
• Low-pass: 3.3kHz and below
• Attenuation characteristic: 12dB/oct

• Actual mounting feasibility, required modifications, and appropriate crossover settings will vary depending on the vehicle and system configuration. We will guide you while confirming on the actual vehicle so that the important midrange can be utilized properly.*