【DAP-A7000Ⅱ (2.5m)｜Balanced Connection Cable for DAP】

Use the DAP-A7000Ⅱ (2.5m) when you want to take audio from a digital audio player via a balanced connection. This cable separates the negative (minus) side that is normally shared between left and right, enabling balanced output through a balanced structure.

It’s a single cable that makes it easier to plan the connection when you want to input the DAP’s audio into a car audio system, or when you want to take advantage of the player’s balanced output. With a cable length of 2.5 m, you can consider routing based on the equipment you use and the installation location.

On the mini-jack side, you can choose from three terminal types: 2.5 mm 4-pole, 3.5 mm 4-pole, and 4.4 mm 5-pole. Selecting without checking the DAP’s output terminal may result in an incompatible connection, so please confirm the terminal shape of your device before purchasing.

When connecting to an in-car system, the best method can vary not only depending on the DAP side, but also on the specifications of the input side and your current system configuration. At Log On, we organize a practical, no-hassle connection method together while confirming your vehicle model, audio setup, and how you plan to use it. If you’re unsure about how to choose terminals or how to connect, please feel free to contact us first.

Key Specifications / Specs

【Basic Information】
Product name: DAP-A7000Ⅱ
Type: Cable for digital audio player
Cable length: 2.5 m

【Connection Structure】
Supports balanced connection
Outputs by separating the left and right negative sides

【Mini-jack】
2.5 mm 4-pole
3.5 mm 4-pole
4.4 mm 5-pole

Please select after confirming the terminal specifications of your DAP and the connected equipment.