DAP-A2200Ⅲ (5.0m)
The DAP-A2200Ⅲ refines the important connections that lead you to music.
【DAP-A2200Ⅲ(5.0m)｜Balanced Connection Cable for Digital Audio Players】
This cable is designed to connect the audio output of a digital audio player in a balanced configuration to compatible equipment such as a car audio system.
By separating the negative (minus) side—normally shared by both channels—into left and right outputs, it supports connections in a balanced structure. It is suitable for those who want to review the connection setup on the music player side, or for those considering cleaner audio signal transmission when used in combination with compatible devices.
The cable length is 5.0m. You can connect your digital audio player and audio equipment while considering in-car routing.
You can choose from the following three types of mini-plugs depending on the equipment you use:
- 2.5mm 4-pole
- 3.5mm 4-pole
- 4.4mm 5-pole
Even if the plug shape matches, the device side must support balanced connection. Because the appropriate cable can vary depending on the input/output specifications of DAPs and car audio, it’s a good idea to check once before purchasing.
At LOGON, we provide guidance while confirming the connection specifications between the player side and the car audio side, how the cable will be routed, and how it will work with your currently used system. If it were me, I wouldn’t decide based on plug shape alone—I’d confirm the actual connection destination before choosing. If you’d like to carefully prepare things from the very “audio input” onward, feel free to contact us.
Main Specifications / Specs
【Basic Information】
Product name: DAP-A2200Ⅲ(5.0m)
Type: Cable for digital audio players
Cable length: 5.0m
【Connection Specifications】
Connection structure: Left/right separated balanced connection
Mini-plug: 2.5mm 4-pole / 3.5mm 4-pole / 4.4mm 5-pole
※ Please check that the equipment side you will connect supports balanced output/input.
| Cable Type | A line cable that connects a DAP's balanced output to an RCA input (part of the "DAP LineCable" series) |
| Connector Type | DAP end: 4.4mm / 3.5mm / 2.5mm balanced plug (choose to match your player); output end: a pair of RCA plugs |
| Pin Assignment | From the plug tip: L+, L−, R+, R− (order varies slightly by plug diameter) |
| Compatible Devices | General DAPs (digital audio players) equipped with a 4.4mm / 3.5mm / 2.5mm balanced output, paired with RCA-input equipment such as a car audio line input |
| Length Options | Sold in several lengths (1.0m / 2.0m / 3.0m / 4.0m / 5.0m, etc.) — this is not a product fixed to a single length |
| Notable Feature | Unlike typical XLR-style balanced wiring that shares a common ground between channels, this cable is designed to keep the left and right signal paths fully separate; the mesh-covered tip on the DAP-side plug is made of a soft, flexible material to reduce stress on the player's jack. |