MAXWIN MR-KIT36 (AD36) Vehicle-Specific Mounting Bracket for the GR Supra

The MAXWIN MR-KIT36 (AD36) is a dedicated bracket designed to install the digital rearview mirrors from the MDR-A and MDR-C series onto the Toyota GR Supra, tailored to the specific vehicle model. Unlike the common method of covering and securing the unit onto the OEM mirror, this bracket is intended to be fitted to the mirror base on the vehicle side, aiming for a more natural finish with reduced “aftermarket” appearance.

Compatible Vehicle Models Registered

Based on our store data, the applicable models are DB42, DB22, and DB82 for the Toyota GR Supra. Even among the same GR Supra, the mounting conditions may differ depending on model year, grade, improvement timing, and the specifications of the OEM mirror base or the covers around the windshield. Please do not judge by vehicle name alone—be sure to match the vehicle inspection document (shaken) vehicle type and the month/year of initial registration, and also the MAXWIN main unit model number you plan to install.

Benefits of Using the Vehicle-Specific Bracket

Using a vehicle-specific bracket makes it easier to properly position and set the angle of the digital mirror unit, while also considering the view from the driver’s seat and an installation that fits well with a sports car interior. It is suitable when you want to avoid installation methods that rely on stacking the unit onto the OEM mirror with rubber bands, or when you place importance on a neat installation, including cable routing. This product is a mounting bracket only; it does not include the digital rearview mirror unit, front/rear cameras, power wiring, extension cables, or installation labor.

Check Before Placing Your Order

For compatibility confirmation, in addition to the DB42/DB22/DB82 vehicle type, please check whether the following are present: the OEM mirror base, the safety support camera(s) around the windshield, sensor(s), and covers. Depending on model year, manufacturer options, windshield replacement history, or aftermarket devices, the shape around the mirror may differ. Even within the MDR-A/MDR-C series, the main unit shape and mounting conditions may vary, so the product model number you plan to use is also required.

From LOGON

For a reliable selection, before placing your order please contact us with the vehicle information you can confirm from the vehicle inspection document, the mirror model number you plan to install, and photos of the OEM mirror base taken from the front and side. If the information is insufficient, we will not make assumptions; we will guide you to provide additional materials. Since installation work involves visibility, camera images, wiring, and driver-assistance functions, we recommend having it performed at a store with specialized knowledge. After installation, please verify that there are no issues with the bracket’s fixed condition, the mirror angle, any interference with the wiring, each camera image, and the operation of the vehicle-side sensors before driving.