[MATCH UP-8DSP MK2 | 9ch DSP-Equipped 8-Channel Power Amp with Built-in DSP]

The MATCH UP-8DSP MK2 is an 8-channel power amplifier with a high-performance 9-channel DSP that processes audio internally at a 48kHz/24-bit sampling rate. The DSP section is powered by a 64-bit processor running at a 295MHz clock speed, enabling precise signal processing.

It features an ACO (Advanced Co-Processor) for faster startup and memory switching, plus VCP (Virtual Channel Processing) for flexible channel configuration. Burr-Brown A/D and D/A converters and high-quality operational amplifiers are used throughout, and the 8-channel power amp section adopts the Class-GD concept.

A DSP amp is not something that sounds finished the moment it's installed. How the input signal is tapped, how it is paired with your speakers, how it is mounted, and how it is tuned to your cabin all shape the final result. We check your vehicle, factory audio system, and the kind of music you usually listen to before proposing the channel count and configuration that fits.

If you want to keep the convenience of your factory system while making the sound easier to listen to, or if you want to build a serious sound system around a 9ch DSP, please get in touch. Let's work out a setup that suits your vehicle without overreaching.

Key Specifications

[Basic Information]

• Product name: UP-8DSP MK2
• Brand: MATCH
• Type: 9ch DSP amp with built-in 8-channel power amp
• Power amp operating class: Class GD

[Amplifier Output]

• RMS output at 4Ω: Channels A/B/C/D/E/F, 6ch x 65W (bridging not supported)
• RMS output at 4Ω/2Ω: Channels G/H, 2ch x 90W/160W (G/H channels only support 2Ω; bridging not supported)
• Frequency response: 20Hz-22kHz
• Damping factor: 100 or higher
• S/N ratio: 104dB or higher (analog input) / 106dB or higher (digital input)
• Total harmonic distortion: 0.03% or less

[DSP]

• DSP: Analog Devices 64-bit/295MHz processor
• Sampling rate: 48kHz/24-bit (internal processing)
• ACO (Advanced Co-Processor): Yes
• VCP (Virtual Channel Processing): Yes
• A/D & D/A converters: High-quality 24-bit Burr-Brown

[Inputs, Outputs & Connectors]

• Input sensitivity: 2.8/3.9/5.5/7.8/11.0V
• Input impedance: 9-33Ω (with ADEP.3 circuit)
• Optical digital input: 1x square Toslink S/PDIF (PCM stereo, 12-96kHz/24-bit)
• 20-pin connector: 4ch high-level input, 4ch speaker output
• 4-pin connector: 2ch high-level input
• 8-pin connector: 4ch speaker output
• Other connectors: 1x MEC slot (on main board), 1x RCA line output (3V RMS output voltage), SCP terminal (for DIRECTOR/URC/CONDUCTOR connection), constant power/ground connector terminals, remote input/output connector terminals, USB-C port (for PC connection)

[Operating Conditions & Other]

• Operating voltage: 10.5-17V (tolerates voltage drops down to 6V for up to 5 seconds)
• Built-in fuses: mini 25A x 2 (inside the unit)
• Dimensions (W x H x D): 130 x 46 x 153mm
• Included accessories: USB cable, 2-pin (remote input/output) cable, 20-pin cable (4ch in/out), 4-pin cable (2ch input), 8-pin cable (4ch output)