【KICKER LX3000.1｜Monoblock Power Amplifier for Powerful Subwoofers】

Even after adding a subwoofer, you may still want a bit more impact and sense of quantity in the bass. That’s exactly what the KICKER LX3000.1 is for.

A high-power monoblock power amplifier capable of up to 3,000W RMS when connected at 1Ω. It’s ideal not only for systems that want to drive large-diameter subwoofers properly, but also for keeping bass from falling apart when you turn the volume up—powerfully supporting the foundation of your music. By not only making the bass louder, but also aligning it with the front speakers and tuning how it sounds inside the cabin, you’ll find it easier to hear added depth and punch in your usual tracks.

It features a Class D design for low current consumption and built-in protection functions that monitor heat, circuits, and voltage. The inputs support not only low-level signals, but also high-level signals up to 40V. From systems that make use of your vehicle’s factory audio to full-fledged setups combined with an external processor, you can consider how to build a system that fits your vehicle and preferences.

With the included LX Control Center, it’s easy to adjust the entire system, and it also includes a gain-match LED that displays a reference for the gain setting. In addition, using the included LX Remote, you can adjust the bass level from the driver’s seat. It’s a convenient setup for anyone who wants to change the presence of the bass to match the song or their mood.

The LX3000.1 is a model you’ll want to consider not just for the amplifier’s standalone performance, but also for things like how to choose the subwoofer, the box volume, power and wiring, and adjustments to gain and crossover. With higher-power amplifiers, the final result changes depending on the installation method and the balance across the whole system. At LOGON, we discuss together how to make the most of the performance in a way that works for you, while checking how you use your vehicle and your current audio configuration.

■ Main Specifications / Specs

【Basic Information】
Product name: LX3000.1
Brand: KICKER
Type: Monoblock power amplifier
Amplifier type: Class D

【Rated Output (14.4V)】
1Ω Monoblock: 3,000W RMS
2Ω Monoblock: 2,000W RMS
4Ω Monoblock: 1,100W RMS

【Dynamic Power】
3,800W

【Frequency Response】
10–160Hz (+0 / -1dB)

【S/N Ratio】
A-weighted / at rated output: 95dB or higher
At 1W output: 75dB or higher

【Input Sensitivity】
High-level input: 1–40V
Low-level input: 125mV–5V

【Crossover】
Low-pass filter: variable 40–160Hz
24dB/octave Linkwitz-Riley

【Subsonic Filter】
Variable high-pass: 10–80Hz
24dB/octave Linkwitz-Riley

【Equalizer】
KickEQ+ parametric bass boost
Boost amount: 0–6dB
Center frequency: 20–80Hz
Bandwidth: 1–5

【Main Features】
FIT+™ technology
Fully differential input
Gain-match LED
Turn-on mode selection
Protection functions for heat, circuits, and voltage
RGB LED accent color: 11 colors
SHOCwave2.0™ bass restoration algorithm

【Included Accessories】
LX Control Center
LX Remote

【Dimensions (Main Unit)】
Height: approx. 60mm
Width: approx. 214mm
Length: approx. 320mm

If you want to drive your subwoofer even more powerfully, and you care not only about the impact of the bass but also about how cohesive the entire system sounds, please feel free to consult while checking your vehicle specifications and current setup. So you can enjoy music comfortably in your important car, I’ll suggest where to focus the effort for effects that are likely to show.