【KICKER 44L7S8 4DVC 8-inch Square Subwoofer｜Add Thick, Room-Filling Bass in Your Car】

You’d like the bass to hit a little harder, but it’s hard to find space to install a large subwoofer. If that’s your situation, you may want to consider the KICKER square subwoofer 44L7S8 4DVC.

This 8-inch model uses KICKER’s unique square cone rather than a typical round one. While keeping the overall dimensions compact, it’s easier to secure sufficient cone area, and it’s designed to help you feel not only the amount of bass, but also the thickness of kick drums and basslines when you listen to music.

When people hear “subwoofer,” they may imagine bass that dominates and upsets the balance with the front speakers. In reality, the impression can vary greatly depending on the mounting method, enclosure volume, the amp pairing, and the tuning inside the vehicle.

44L7S8 4DVC can be used in a sealed box or a ported (bass-reflex) box, with a recommended amplifier output of 450W RMS. It can deliver solid performance, and it can also be adjusted to add a natural thickness that supports the front speakers. If I were choosing, I’d first confirm whether you want bass to stand out or whether you want to enrich the front sound, then plan the combination based on the overall balance in the car.

At LOGON, we don’t decide based on subwoofer specs alone. We guide you by checking your current audio setup, the space you can install in, the kind of music you usually listen to, and your preferred listening volume. Even with the same woofer, the final sound changes depending on which enclosure you put it in, which amp you use to drive it, and how you connect it to the front speakers.

If you feel that the bass is lacking, you want more depth to your music, or you don’t want to place a large enclosure, let’s come up with a realistic setup together—while checking whether it fits your vehicle and your current system.

Main Specifications / Specs

【Basic Information】
Product name: 44L7S8 4DVC
Brand: KICKER
Type: 8-inch square subwoofer
Voice coil: Dual voice coil
Impedance: 4Ω DVC

【Performance】
Recommended amplifier output: 450W RMS
Peak power: 900W
Sensitivity: 83.6dB (1W/1m)
Frequency response: 28Hz–100Hz

【Construction / Specifications】
Cone: Injection-molded SoloKon™ woofer
Magnet: Large ceramic magnet
Basket: Spoke-design steel basket
Back plate: UniPlate™ back plate & pole piece
Other: 360-degree back brace, thick tinsel leads, nickel-plated speaker terminals

【Mounting Dimensions】
Mounting depth: approx. 12.1cm
Square mounting cutout: approx. 18.4cm

【Recommended Enclosure Volume】
Sealed box: approx. 14.16–21.24L
Ported (bass-reflex) box: approx. 18.6–28.3L

*We will advise you after confirming the available space in your vehicle and your audio configuration to determine actual fit and enclosure specifications.
Shop owner: Komizo