
A monaural amplifier that brings out the impact and definition of the bass with plenty of 1200W headroom.
【KICKER CXA1200.1 | Monoblock Power Amplifier for Subwoofers】
Even after adding a subwoofer, you may want a bit more low-bass quantity and “punch.” That’s exactly what the KICKER CXA1200.1 delivers—solid, dependable power.
This monoblock amplifier uses a Class D design and supports output of 1,200W RMS at a 1Ω load. While adding thickness and impact to the bass inside your vehicle, it helps bring out the full performance of your subwoofer. Not only when you turn the volume up, but also at everyday listening levels, the presence of the bass and kick drum becomes easier to hear. It firmly supports the low-end foundation that front speakers alone are often unable to deliver.
Equipped with a low-pass filter, a subsonic filter, and a bass-boost feature, it allows you to fine-tune the sound to match your subwoofer size, enclosure/box, and your front-speaker setup. It also supports an optional remote bass controller, so you can adjust the bass level right from your seat according to the track or your mood.
This is not an amp just for making things loud. It’s designed to shape which frequency bands play—and how strongly—so you can enjoy bass naturally throughout the entire car. It’s important to consider not only the amplifier’s output, but also the subwoofer impedance, box volume, power wiring, installation method, and how it ties in with the front speakers.
At LOGON, we confirm your vehicle model, your current audio system, the music you usually listen to, and your preferences for bass. Then we work with you to determine the power you need and the best adjustment approach. If you want a system that delivers impact without making only the bass stand out too much—and sounds great to listen to—please feel free to consult us.
【Basic Information】
Product name: CXA1200.1
Brand: KICKER
Type: Monoblock power amplifier for subwoofers
Amplification type: Class D
Channel count: 1ch
【Rated Output】
At 1Ω load: 1,200W × 1
At 2Ω load: 600W × 1
At 4Ω load: 300W × 1
Stable operation at 1Ω: Yes
【Input / Adjustment Functions】
Input: Low-level input (RCA) / High-level input
Low-pass filter: 50Hz–200Hz
Subsonic filter: Yes
Bass boost (KickEQ): 0 to approx. +6dB
Remote bass controller: Supported (sold separately)
【Acoustic Characteristics】
Frequency response: Approx. 25Hz–200Hz
Signal-to-noise ratio: Approx. 95dB or higher
【Other】
Soft start / soft off function: Yes
Dimensions (main unit): Approx. 306mm × 170mm × 59mm
*Output values vary depending on the impedance of the subwoofer you connect. Please confirm the actual system configuration and power wiring according to your vehicle and the equipment you will use.