【Trade-In Speaker Set for TESLA CiCi3 W200FM-S3+CFMK200 TES.1】

This is a set of a 20cm mid-bass driver unit and a model-specific flex mount, designed for those who want to add a bit more low-end thickness and firmly reinforce the musical foundation—stepping up from the factory speakers in a TESLA.

CiCi3 W200FM-S3 is a 20cm unit developed primarily for low-frequency reproduction. It uses a senosphere-coated paper cone, a high-efficiency ferrite magnet, and a 25mm voice coil to strongly support the rhythm and bass lines of music. Rather than simply making the bass louder, it is for people who want to add the “thickness” of the music that sits beneath the vocals and mid-to-high frequencies.

Because it includes the COMPOSE FlexMount200 made for TESLA, the setup makes it easy to consider a trade-in installation into the factory location. It also comes with a dedicated grille and ring, making it a good option if you want to revisit the sound foundation without significantly changing the look inside the cabin.

However, the final result isn’t determined by swapping the driver alone. Depending on the combination with the factory system, the condition of the door side, and the installation method, the way the low end comes out and the cohesion of the sound will change. Since there are also items that may need to be checked depending on the TESLA vehicle specifications, it’s best to sort out together—while looking at the actual car—how far the replacement should go.

At LOGON, we focus on not only making the sound louder, but also ensuring that the music you normally listen to can be enjoyed naturally. If you tell us what you’re dissatisfied with in your current sound and what music you often listen to, I will guide you on which parts I would personally start working on.

Main Specifications

【Basic Information】
Product name: Trade-In Speaker Set for TESLA CiCi3 W200FM-S3+CFMK200 TES.1
Type: 20cm mid-bass speaker set
Configuration: CiCi3 W200FM-S3 mid-bass driver unit, COMPOSE FlexMount200 for TESLA
Grille: Included
Ring: Included

【Speaker Unit】
Unit size: 20cm
Cone: Senosphere-coated paper cone
Dust cap: Made of polyurethane
Magnet: High-efficiency ferrite magnet
Voice coil: 25mm diameter
Frame: High-tech polymer composite material

【Performance】
Frequency response: 50Hz–3kHz
Sensitivity: 90dB
Impedance: 3Ω
Maximum input: 150W
Minimum resonance frequency: 67Hz

【Mounting Dimensions】
Baffle cutout: 173.5mm
Frame outer diameter: 195mm
Recess (mounting depth): 63.7mm
Installation: Supports trade-in installation into the factory TESLA location
Connection: Supports COMPOSE ProConnect connection terminals

Depending on the TESLA model and specifications, the items to be checked may vary. If you are considering replacement, please let us know your current vehicle specifications and your sound preferences. Let’s think together about a configuration that fits your car.

Shop Owner
Komizo (小溝)