
Mercedes-Benz-specific design adds rich depth to your usual music.
【20cm Mid-Woofer for Mercedes-Benz Right-Hand-Drive Vehicles GZCS W-200MB.RH-L】
This is the 20cm mid-woofer “GZCS W-200MB.RH-L”, designed for Mercedes-Benz right-hand-drive vehicles—specifically for those who want the low-to-midrange frequencies on the passenger-side (front passenger seat side) to sound a bit more solid.
Using an aluminum cone and pairing it with a lightweight aluminum die-cast basket adds strength to the low frequencies that form the foundation of the sound. It’s a unit that’s easy to consider if you feel the sound from the factory speakers is lacking, or if you want to make the low-midrange that supports vocals and instruments a little thicker.
It supports a maximum input of 220W and a rated input of 110W, with a frequency response of 30Hz to 1500Hz. The key is to combine it while keeping an eye on the overall system balance—rather than simply making the low notes louder.
A dedicated product for right-hand-drive and the front passenger seat, it also includes a coupler. However, actual fitment and compatibility with the factory system must be confirmed based on the model year, grade, and vehicle specifications. Even with the same product, the final result can vary depending on the installation method and surrounding adjustments. If it were me, I wouldn’t decide based on the unit alone—I’d confirm your current system and the sound you want before advising you.
If you’d like the Mercedes-Benz sound to feel a bit fuller, and you want stronger bass but don’t want sounds that stand out too much inside the cabin, let’s sort out the direction once while checking your vehicle’s current condition. Rather than simply adding more products, we’ll think together about a method that suits your existing system.
【Basic Information】
Product name: GZCS W-200MB.RH-L
Type: Mid-woofer
Purpose: Mercedes-Benz right-hand-drive vehicle / front passenger seat
【Unit】
Diameter: 8 inches (20cm)
Cone material: Aluminum
Basket: Aluminum die-cast
【Performance】
Maximum input: 220W
Rated input: 110W
Nominal impedance: 4Ω
Frequency response: 30Hz to 1500Hz
【Included Items】
Includes a coupler
| Woofer unit diameter | 20cm |
| Built-in amplifier wattage | |
| [Compatibility] | Depending on the specifications and model year, the genuine woofer and enclosure may be glued together. It may be difficult to remove, process and install. |