【ES 100 KE｜10cm 2-way component speaker with K2 technology】

The sound from the factory speakers feels a little underwhelming. I want to hear the vocals and instruments a bit closer and more clearly.

That’s where the ES 100 KE comes in.

Despite its compact 10cm size, it features the legendary K2 aramid fiber cone. In a small body, it pairs with the K2 sandwich cone that balances stiffness, lightweight design, and damping properties.

With strong transient response, this speaker makes it easier to perceive the fine details in vocal contours and instruments like guitar and piano. Even with the music you usually listen to, you’ll notice sounds that were previously a little buried, and your drive-time listening should feel even more enjoyable.

Even in a compact size, it draws out plenty of musical information

The TMD surround is designed to deliver a pure midrange with low distortion. When the midrange is well-tuned, vocals become easier to hear clearly, and you can also feel the overall cohesion of the music.

The treble is covered up to a maximum of 22kHz by the TKME tweeter. This is for those who don’t just want loud high frequencies, but want the subtle nuances and the sense of air in the sound to be reproduced naturally.

Since a compact crossover is also included, it’s a configuration that’s easy to choose for anyone considering a system upgrade using 10cm speakers.

The final sound changes depending on how you install it

Even with the same speakers, how you hear them will vary depending on the vehicle’s mounting condition, the mounting base, and the treatment of the surrounding area.

While many vehicle models are relatively easy to install 10cm speakers, you still need to check things such as the shape of the factory speaker, the mounting method, depth, and surrounding space. Rather than deciding only the product in advance, it’s less likely you’ll regret it if you first confirm the vehicle and the factory system, then consider how much work to take on.

At LOGON, while listening to your vehicle model, how you use it, and your current audio concerns, we guide you on whether to replace only the speakers, whether to also process the installation area, and even how to combine them with other equipment.

If it were me, I’d choose after organizing not only the speaker’s performance but also what kind of sound I want to achieve after installation. Let’s confirm together whether the ES 100 KE will suit your vehicle and what kind of finish you can aim for.

Main specifications / specs

【Basic information】

• Product name: ES 100 KE
• Type: 10cm 2-way component speaker
• Configuration: Speaker unit, tweeter, compact crossover

【Speaker section】

• Rated input: 60W
• Maximum input: 120W
• Sensitivity: 90dB (2.83V/1m)
• Rated impedance: 4Ω
• DC resistance: 2.8Ω
• Voice coil diameter: 20mm / 3/4 inch
• Former: Kapton (2-layer)
• Wire: CCAW
• Surround: Butyl

【Technologies / materials used】

• K2 sandwich cone
• K2 aramid fiber cone
• TMD surround
• TKME tweeter
• Treble reproduction: up to 22kHz (max)
• Compact crossover included

※ Depending on the vehicle model, installation methods and required work may differ. While confirming the actual vehicle and the factory system, we provide a reasonable, non-stressful configuration.