【ETON RSR160 16cm 2-Way Speakers｜For Those Who Want to Enjoy Clear, Well-Defined Sound】

If the sound from your factory speakers feels a bit muffled and you want to hear vocals and instruments a little more clearly, then the one to consider is the ETON RSR160, a speaker brand from Germany.

The RSR160 is a 2-way speaker that combines a 25mm silk-dome tweeter with a 160mm CRC fiber-cone mid-bass driver. Its sound is straightforward to begin with, making it easy to reproduce clear vocal contours and detailed instrument nuances.

Its standout feature is the mid-to-high range that opens up cleanly, but it isn’t a type where only the treble stands out. With a frequency response from 71Hz to 24kHz, you can more easily notice sounds and vocal nuances that you may not have realized in the music you listen to every day. It’s well suited for those who want to enjoy music on long drives and for those who prefer clear, information-rich sound over muddier tones.

The tweeter uses a 25mm silk dome, and the mid-bass uses a 160mm CRC fiber cone. With a rated input of 50W and a maximum input of 100W, you can consider setups ranging from a factory replacement to a system combined with an external amplifier—while keeping the overall balance of the vehicle in mind.

Speakers don’t deliver their final sound just by swapping the units. Depending on the condition of the doors, the mounting method, how the baffles are built, vibration damping treatment, and the combination with your factory audio, the overall impression of the finished sound can differ even with the same RSR160.

If it were me, I’d first check the vehicle’s factory system and the music you usually listen to, then decide whether to proceed with the speakers alone or to include processing and adjustments on the door side. Rather than adding everything unnecessarily, organizing where you should invest and what can be leveraged in your current system can lead to greater satisfaction after installation.

For those who want to enjoy their usual music a bit more clearly with the ETON RSR160—enjoy it comfortably. While confirming your vehicle model, factory audio specifications, and your sound preferences, we’ll think together about a no-stress configuration.

Main Specifications

【Basic Information】
Product name: RSR160
Brand: ETON
Type: 2-way component speakers
Grille: Included

【Speaker Configuration】
Tweeter: 25mm silk dome
Mid-bass: 160mm CRC fiber cone

【Performance】
Frequency response: 71Hz–24kHz
Sensitivity: 90dB
Minimum resonant frequency: 71Hz
Rated input: 50W
Maximum input: 100W

【Impedance】
Tweeter: 8Ω
Mid-bass: 4Ω

【Crossover】
Crossover frequency: 2.5kHz
*Excludes type-M
Slope: HP 12dB/oct, LP 6dB/oct
*Excludes type-M
Tweeter attenuator: 3-step adjustment of 0 / -3.0 / -6.0dB
*Excludes type-M

【Mounting Dimensions】
Tweeter/baffle cutout: 44mm
Tweeter/frame outer diameter: 49mm
Tweeter mounting depth: 15mm
Mid-bass/baffle cutout: 143mm
Mid-bass/frame outer diameter: 165.5mm
Mid-bass mounting depth: 66.4mm

【Passive Network】
Outer dimensions: W66 × H37 × D121mm
*Excludes type-M

Whether the speakers can be installed, what machining is required, and how they pair with the factory system will vary by vehicle model and specifications. By confirming on an actual vehicle, we’ll guide you with the installation method that best brings out the advantages of the RSR160. If you’re interested, please feel free to consult us, including the music you normally listen to and your current sound concerns.