【MOVE 10-300AR｜25cm Powered Subwoofer】

I want a bit more low-bass thickness and impact in the sound from my factory audio.
Not just making the bass louder, but adding a foundation that supports the vocals and instrument sounds.

If that’s what you’re looking for, the MOVE 10-300AR is for you.

A powered subwoofer equipped with a 25cm woofer, improved based on the previous model. Because it features a bass-reflex enclosure with a large-diameter driver and a high-power amplifier built in, it’s easier to organize and set up than systems that combine separate amplifiers and subwoofers.

Using a newly developed 25cm reinforced paper cone diaphragm and a 50mm voice coil, the R.M.S. output is 150W. This is a model that’s easy to consider not only for those who want more bass quantity, but also for those who want the music to have more body at everyday listening volumes—not just when turning the volume up.

Bass isn’t something you should try to make noticeable with the subwoofer alone. Whether the sound comes together naturally changes depending on how it connects with the front speakers and how you set the low-pass frequency. The MOVE 10-300AR includes a variable low-pass adjustment from 40Hz to 250Hz and a BASS EQ that can be adjusted from 0 to +18dB centered at 45Hz. With the included remote level controller, you can adjust how the bass comes out to match the in-car environment and the music you’re listening to.

Since it supports high-level input, you can also consider adding it to a system that leverages your factory navigation system and factory audio. However, the actual connection method, how power is taken, and the installation location will vary depending on the vehicle specifications and your existing system. The unit measures 450mm (W) × 335mm (H) × 360mm (D) and weighs 11.8kg, so it’s important to check available installation space.

Even with the same subwoofer, how it sounds will differ depending on where you install it, how you wire it, and how you connect it to the front side. At LOGON, we install and fine-tune it so that bass doesn’t just come out strong, but so that the music you normally listen to comes together comfortably—confirming your vehicle model and how you use it along the way.

If you want to add a little more thickness to your factory sound, or if you’re not considering an elaborate system but still want to enjoy bass properly, let’s decide the direction together while checking compatibility with your vehicle.

Main Specifications / Specs

【Basic Information】

• Product name: MOVE 10-300AR
• Type: 25cm powered subwoofer
• Enclosure type: Bass reflex

【Woofer Unit】

• Unit: 25cm reinforced paper cone woofer
• Voice coil diameter: 50mm
• Impedance: 2Ω + 2Ω (DVC / dual voice coil)

【Output / Adjustment】

• R.M.S. output: 150W
• Crossover type: Variable
• Low-pass frequency: 40Hz to 250Hz
• BASS EQ adjustment: 0 to +18dB / 45Hz

【Input / Features】

• High-level input: Supported
• Auto power-on function: Supported
  ※ Only when using high-level input
• Built-in fuse: 20A ×1
• Supply voltage: 14.4V

【Dimensions / Weight】

• Dimensions: 450mm (W) × 335mm (H) × 360mm (D)
• Weight: 11.8kg

【Included Accessories】

• Remote level controller (main unit)
• Cable for remote level controller: 5.0m
• Power cable with connector: 0.5m
• High-level input cable: 0.9m

Shop owner Komizo