【ES-T10 Inner Baffle for 16.5cm Speakers (Toyota/Nissan)】

When replacing a speaker, it’s important to consider not only the speaker itself, but also the base that firmly mounts it to the door.

ES-T10 is an inner baffle board made of ABS resin, designed for 16.5cm speakers for Toyota and Nissan vehicles. Use it as a base to mount the speaker securely and stably to the door, and it serves as a key component when replacing speakers.

The inner diameter is 145 mm, and the thickness is 19 mm. Since a waterproof gasket is already attached to the back side, it’s also designed with moisture protection in mind for use inside the door.

However, screws for fixing the speaker, bolts to secure the inner baffle board to the vehicle, and sponge tape for the speaker side are not included. When installing the screws to fix the speaker, use a length within the thickness of the baffle so that the screws do not pass through the baffle. The recommended screws are 4×16.

Speaker replacement results vary not only depending on how you choose the baffle, but also on how it is secured to the vehicle, how the inside of the door is treated, and the combination with the speaker. There may be points to check depending on the vehicle model and speaker, so if you’re unsure about compatibility or installation methods, you can work it out together while confirming the vehicle and the speaker to be used.

■ Main Specifications

【Basic Information】
Product name: ES-T10
Type: Inner baffle board
Compatible vehicles: For Toyota/Nissan
Compatible speakers: For 16.5cm speakers

【Materials & Dimensions】
Material: ABS resin
Inner diameter: 145 mm
Thickness: 19 mm

【Waterproofing】
Waterproof gasket on the back side: Pre-attached

【Included Items / Notes】
Bolts for fixing the inner baffle: Not included
Screws for mounting the speaker: Not included
Sponge tape for the speaker side: Not included
Recommended screws: 4×16
*For screws used to fix the speaker, please use a length within the baffle thickness.