【ES-H71 Inner Baffle for Honda Vehicles | For Mounting 16.5 cm Speakers】

If you want to replace your speakers with 16.5 cm models, but you’re wondering whether they will match the factory mounting shape as-is and whether they can be securely fixed to the door, this is for you.

ES-H71 is an inner baffle board used to mount 16.5 cm speakers for Honda vehicles. It serves as the base to secure the speaker to the door, and helps align the mounting conditions with the vehicle side.

Made of ABS resin, with a waterproof gasket already attached to the rear side. This specification is designed with consideration for water ingress, which is often a concern when replacing speakers. The inner diameter is 145 mm, and the thickness is 19 mm.

Even when choosing the same speaker product, the final results can vary depending on the mounting method and the condition of the base. By proceeding while checking the baffle’s mounting condition, the condition on the door side, and how it pairs with the speaker, you can arrange it into a shape that is easy to use even after replacement.

Please note that for the screws used to fix the speaker, use a length that is within the thickness of the baffle. The recommended screws are 4×16. Using screws that are too long may affect the vehicle side or the speaker, so pay special attention to this part.

Mounting conditions may vary depending on the vehicle model and the speaker. If you’re concerned about compatibility or installation method, please consult while confirming the vehicle information and the speaker model. If you’re going to replace your speakers, you’ll want to finish it by matching the mounting method properly.

Main Specifications

【Basic Information】

• Product name: ES-H71
• Type: Inner baffle board
• Purpose: For mounting 16.5 cm speakers
• Compatibility: For Honda vehicles

【Materials & Dimensions】

• Material: ABS resin
• Inner diameter: 145 mm
• Thickness: 19 mm

【Waterproofing & Included Items】

• Waterproof gasket on the rear side: Pre-attached
• Bolt for fixing the inner baffle board: 1 included

【Screws for Fixing the Speaker】

• Recommended size: 4×16
• Note: Use a length within the thickness of the baffle.