【Scandinavia Passive Crossover｜For Scandinavia 30 / 75】

A passive crossover network for combining the Scandinavia 30 and Scandinavia 75.

The crossover point is 5 kHz, with both the 12 dB/oct low-pass on the Scandinavia 30 side and the 12 dB/oct high-pass on the Scandinavia 75 side. Use it when you want to connect the two units naturally and divide the frequency range between them.

Note that this product is not a passive network that alone can be used to build a 3-way system. For the high-pass of the Scandinavia 75, you will need a separate active network such as an amplifier’s built-in crossover function or a DSP. The recommended high-pass setting is 200–300 Hz.

The tweeter level can be adjusted in two steps. You can tune it while checking the brightness of the sound in the cabin and the balance with other speakers.

A passive network is not just “connect and done”—the final result varies depending on the vehicle-side system configuration, the amplifier, and installation conditions. At Logon, you can get advice not only on the combination of Scandinavia 30/75, but also on the current audio setup and your preferred sound, including crossover settings and level adjustments.

Let’s also sort out together—looking at the entire system—questions such as “How should I combine the Scandinavia 30 and 75?” and “Can I convert it to a 3-way setup?”

Main Specifications / Specs

【Basic Information】
Product name: Scandinavia Passive Crossover 3-way
Type: Passive crossover network
Supported units: Scandinavia 30 / Scandinavia 75

【Crossover】
Crossover point: 5 kHz
Low-pass: 12 dB/oct
High-pass: 12 dB/oct

【Level Adjustment】
Tweeter level select: 2 steps

【Notes on Use】
For the Scandinavia 75 high-pass, use an active network such as an amplifier’s built-in crossover or a DSP
Recommended high-pass for Scandinavia 75: 200–300 Hz
Not supported for a 3-way passive configuration using this product alone