【2-Way Passive Network Dedicated to Scandinavia 30/165】

This is a 2-way passive network designed to be used in combination with Scandinavia 30 and Scandinavia 165.

Even if you replace the speakers, if the frequency bands handled by the tweeter and the mid-bass are not matched well, it will affect how coherent and easy to listen the sound is. This network splits the audio ranges sent to the tweeter and mid-bass, using 4 kHz as the crossover point.

The tweeter side uses a 12 dB slope, while the mid-bass side uses a 6 dB slope. In addition, since the tweeter level can be switched in two steps, you can adjust how the high frequencies are presented to suit installation conditions in the cabin and your preferences.

Even with the same speakers, the sound impression changes depending on the vehicle model, installation position, and the door-side treatment. If it were me, I wouldn’t just install the network and stop there—I would listen in the actual car, check the tweeter level, and fine-tune the way the vocals come through and the balance of the high frequencies.

This is a part I’d like you to consult about if you want to make proper use of the performance of the Scandinavia 30/165, or if you find the tweeter sound too strong—or, on the other hand, if you want to hear a little more brightness. After confirming your vehicle and current system, we’ll think together about a reasonable, no-stress configuration.

■ Main Specifications / Specs

【Basic Information】
Product name: Scandinavia Passive Crossover 2-way
Type: 2-way passive network
Compatible speakers: Scandinavia 30 / Scandinavia 165

【Crossover】
Crossover point: 4 kHz
LP slope: 6 dB
HP slope: 12 dB

【Adjustment Functions】
Tweeter level select: 2 steps

• Depending on the speaker mounting condition and the vehicle specifications, the required installation work and adjustment methods will vary. Let’s use the actual vehicle and your current system as reference and finish with a sound that’s easy to use and natural.