【DLS RCS6.2i｜Natural and Easy-to-Listen 16.5cm Separated 2-Way Speaker】

The RCS6.2i from Scandinavian Swedish speaker brand “DLS” is a good choice if you want to add a bit more clarity to the sound of your factory speakers or if you want to make vocals easier to hear.

A separated 2-way setup combining a 16.5cm fiberglass cone woofer and a 25mm silk dome tweeter. The highs retain detailed expression while sounding gentle on the ear, allowing you to enjoy vocals and instrument tones naturally. It’s an easy-to-use sound direction for anyone who wants to enjoy the music they listen to every day for long periods—as well as for classical, jazz, and female vocals.

The woofer supports clear, well-centered mid-bass, and through a clear division of roles with the tweeter, it creates a configuration that helps produce both a sense of soundstage spread and cohesion from the front. When replacing factory speakers, the finish can change not only by swapping the speaker itself, but also depending on the door-side installation method, the mounting base, and compatibility with the existing system.

The RCS6.2i is a slim design with a mounting depth of 45mm, and it also includes a tweeter mount, speaker grille, and a passive network. However, since actual fitment and the required parts vary depending on the vehicle model and the specifications of the factory speakers, it’s best to consider it after checking your specific vehicle.

If it were me, I wouldn’t decide solely by replacing the speakers by themselves; I’d think together about the installation method and the necessary sound adjustments based on the vehicle and how you normally listen. If you want a natural, easy-to-listen sound, include the RCS6.2i in your shortlist and consult with us.

Key Specifications

【Basic Information】
Product name: RCS6.2i
Brand: DLS
Type: 16.5cm / 25mm separated 2-way speaker
Impedance: 4Ω

【Speaker Configuration】
Woofer: 16.5cm fiberglass cone
Tweeter: 25mm silk dome tweeter

【Performance】
Rated input: 50W
Maximum input: 90W
Frequency response: 55Hz–22kHz
Output sound pressure level: 86dB

【Mounting Dimensions】
Mounting hole diameter: 146mm
Mounting depth: 45mm

【Network】
Crossover point: 5.5kHz
Slope: LP 6dB / HP 12dB

【Included Accessories】
Passive network
Speaker grille
Tweeter mount kit