【PA6.20｜16.5cm 2-way Separate Speakers】

The sound from your factory speakers is a bit lacking, and you’d like to hear the vocals and instruments more clearly. That’s where PA6.20 is a great choice—especially when you’re considering a speaker upgrade for the first time.

This 2-way separate type combines a 16.5cm polypropylene cone woofer with a 25mm silk dome tweeter. Since you can position the woofer in the door to handle the low-to-mid frequencies and place the tweeter separately to reproduce the high frequencies, it’s an arrangement that makes it easier to fine-tune soundstage and how vocals come through.

This is an entry-class product, but with specifications including a rated input of 60W, maximum input of 120W, and an impedance of 3Ω. It’s a model that balances well with cost for those looking to step up from factory speakers. If you want your usual music to sound a little brighter and easier to hear, this should be a solid starting point.

However, speaker results aren’t determined by simply replacing the product. Depending on the door-side installation method and mounting base, the tweeter’s orientation, and how it’s paired with your factory audio system, the way the same PA6.20 sounds can change. It’s important to review your vehicle model, your factory system, and how you listen to music, and then organize the necessary installation details together.

It’s a good fit for people who want to change the sound from factory without spending a lot at first, those who want vocals to feel a bit closer, and those who want to try separate speakers. We’ll guide you with the installation method and related surrounding work tailored to your vehicle—so let’s think it through together starting with a reasonable, no-stress setup.

Key Specifications / Specs

【Basic Information】
Product Name: PA6.20
Type: 16.5cm 2-way separate speakers
Class: Entry class

【Speaker Configuration】
Woofer: 16.5cm polypropylene cone
Tweeter: 25mm silk dome
Impedance: 3Ω

【Input / Performance】
Rated Input: 60W
Maximum Input: 120W
Frequency Response: 65Hz–20kHz
Sound Pressure Level: 87dB

【Mounting Dimensions】
Mounting Hole Diameter: 144mm
Mounting Depth: 58mm

【Network】
Crossover Point: 5kHz
Slope: 12dB

【Included Items】
Passive network
Speaker grilles
Tweeter mount kit (2 types)