【LIVE L165P+LFR52 Separate 3-Way Speakers｜For Those Who Want to Enjoy a Richer Musical Expression】

You want a bit more thickness in the sound from the factory speakers, and you want to clearly hear the fine details in vocals and instruments. If that’s what you’re looking for, consider the LIVE L165P+LFR52 Separate 3-Way.

The main unit, the LIVE L165P, uses a high-rigidity Kevlar cone. It’s designed to draw out strong response and impact in the mid-bass to midrange, making it easier to convey the presence of bass, guitars, and vocals when you listen to music. In addition, by combining it with the LFR52, you can supplement the amount of information in the high-frequency range, making it easier to express soundstage width and subtle nuances.

With a rated power handling of 90W and a maximum of 180W, it’s suitable not only for replacing speakers within the factory system, but also for using an external amplifier to bring out the speakers’ full potential. With a high sensitivity of 91.7dB, it’s also a feature that you can enjoy a solid sound without turning the volume up too high, even when driving them from a factory navigation unit or head unit.

However, the LIVE L165P has a mounting depth of 76.2mm, and it may be deeper than typical factory speakers. Depending on the vehicle model, you may need to check for interference with the inside of the door, glass, and other components. Also, a 3-way speaker setup isn’t something that’s finished just by swapping the speakers—your impression will change depending on the mounting position, the base, how the door side is treated, and how each unit is connected.

If it were me, I would decide the configuration after checking the current factory system, the mounting space inside the car, and the type of music you usually listen to—rather than deciding only the product first. While looking at your actual vehicle, we can go through together whether it can be installed without problems and how far modifications are needed to get the best effect. If you don’t want to regret your speaker upgrade, feel free to consult us.

Main Specifications

【Basic Information】
Product name: LIVE L165P+LFR52
Type: Separate 3-Way speakers
Configuration: LIVE L165P / LFR52

【LIVE L165P】
Speaker type: 165mm 2-way speakers, with 25mm tweeter
Reproduction frequency range: 50Hz–25kHz
Rated input: 90W
Maximum input: 180W
Input impedance: Woofer 3Ω / Tweeter 3Ω
Sound pressure level (output): 91.7dB (2.83V / 1m)
Mounting hole diameter: 142mm
Mounting depth: 76.2mm
Crossover frequency:
・Woofer low-pass 4kHz 6dB / Oct
・Tweeter high-pass 4kHz 12dB / Oct

【LFR52】
Speaker type: 50mm full-range speaker
High-frequency extension: Supported
Magnet: Neodymium magnet
Reproduction frequency range: 200Hz–45kHz
Rated input: 25W
Input impedance: 4Ω
Sound pressure level (output): 86.0dB (2.83V / 1m)
Mounting hole diameter: 56.5mm
Mounting depth: 32mm
Included accessories: Grill

• Whether installation is possible and what processing may be required will vary depending on the vehicle model and the specifications of the factory speakers. After confirming on your actual vehicle, we will guide you to the best mounting method for your car.
  Shop owner: Komizo (小溝 (コミゾ))