【BLAM SIGNATURE MULTIX Barrel MB6P+AMT 1 BK | Separate 2-Way Speakers for High-Quality Car Audio】

These are BLAM’s high-grade separate 2-way speakers, designed for anyone who wants to enjoy vocals and even the smallest details of instruments a bit more thoroughly by replacing the factory speakers.

The 165mm mid-bass of the Multix Barrel MB6P covers 60Hz to 5kHz. It handles everything from the mid-bass and lower-midrange that forms the foundation of music to the vocal range, shaping sound thickness and response. The high frequencies are handled by the AMT 1 BK Air Motion Transformer, reproducing from 2.5kHz to 35kHz. If you want to pick up information that tends to get buried with factory speakers—such as the breath of vocals and the lingering resonance of cymbals—this is for you.

Multix Barrel features a compact aluminum frame with ensured rigidity. Even in vehicles where installation space is limited, the design makes it easier to consider based on the vehicle model and installation position. It’s also designed with heat dissipation from the frame in mind, so you can more easily make the most of the speaker’s performance even when you want to enjoy higher volume.

This model is a spec with no passive crossover included. How the mid-bass and AMT are split and played will affect the final result depending on the amplifier and DSP you use, as well as the installation conditions on the vehicle side. This isn’t a speaker you can simply swap in—it's one you’ll want to plan with consideration for the door-side baffle and sound deadening, the tweeter mounting position, and even the crossover and volume balance.

If it were me, I’d think through the setup after confirming your current navigation system and amplifier and how you listen inside the car, rather than deciding based on the speaker alone. Even with the same speaker, the impression changes depending on where and how it’s installed and how it’s adjusted. If you want vocals to sit naturally forward, want to enjoy fine details even at higher volume, or want to build a more advanced car audio setup than you’ve had before, please feel free to consult us. Let’s organize the best way to use it for your specific car together.

Main Specifications

【Basic Information】
Product name: BLAM SIGNATURE MULTIX Barrel MB6P+AMT 1 BK
Type: Passive separate 2-way speaker
Configuration: 165mm mid-bass + AMT tweeter
Passive crossover: None

【Multix Barrel MB6P Mid-bass】
Reproduction frequency range: 60Hz to 5kHz
Rated input: 125W
Input impedance: 2Ω
Sound pressure level: 93.62dB
Mounting cutout size: 141.9mm
Mounting depth size: 77.2mm

【AMT 1 BK Tweeter】
Speaker type: Air Motion Transformer
Reproduction frequency range: 2.5kHz to 35kHz
Rated input: 10W
Input impedance: 6Ω
Sound pressure level: 90.1dB
Mounting cutout size: 65.2mm
Mounting depth size: 16.6mm