【AP 1P｜29mm Tweeter Set for Tuning the High Frequencies of the Prima Series】

You want a bit more clarity and soundstage in the factory speaker sound. You’d like to enjoy the subtle nuances of vocals and instruments naturally—also inside the car. If that sounds like you, consider AP 1P.

This set combines a 29mm tweeter and a crossover. It has been designed based on cutting-edge modeling technology and long-duration in-car listening tests. With its design that radiates sound from the same point, it helps prevent the sound connection from becoming unnatural, delivering a natural listening impression as well.

It’s for those who don’t just want to boost the high frequencies, but want the outlines of vocals and the fine details of instruments to be clean and easy to hear. For people who listen to music for long periods, it’s also a good option when you want high frequencies that you can enjoy naturally in the car rather than harsh, strongly stimulating sound.

Also, because the mounting depth is designed to be relatively compact at 12.2mm, this tweeter is easier to consider even if your vehicle’s installation space is limited. However, the final result will vary depending on the actual mounting position and how it’s combined with the factory speakers.

Tweeters are the part most likely to change the sound impression even with the same product, depending on orientation, mounting method, and how they are connected to the factory speakers. At LOGON, we work with you to figure out the best way to incorporate the AP 1P while confirming the vehicle model, the condition of your factory audio, the music you typically listen to, and your sound preferences.

If you don’t want a sound where only the treble stands out, or if you want to fine-tune the sound a bit while keeping the feel of the factory setup, please consult us based on your vehicle. Rather than deciding on the product alone, we’ll guide you with the listening experience after installation in mind.

Main Specifications

[Basic Information]

• Product name: AP 1P
• Series: Prima
• Type: Tweeter set
• Configuration: 29mm tweeter + crossover

[Performance]

• Playback frequency range: 1.2kHz–25kHz
• Rated input: 50W
• High-pass conditions: 2.5kHz / 12dB Oct
• Input impedance: 8Ω
• Output sound pressure level: 92dB / SPL

[Mounting Dimensions]

• Mounting hole diameter: 40.8mm
• Mounting depth: 12.2mm

Since installation conditions and combinations vary by vehicle model, let’s fine-tune it into great sound in a practical, stress-free way while checking your actual vehicle.