【ARC Audio 2150 SE-Trad｜2ch Power Amplifier that Brings Out the Density and Power of Sound】

When listening to your car audio, have you ever thought, “I want a little more thickness in the sound,” or “I want to feel the positioning of vocals and instruments more clearly”?

ARC Audio 2150 SE-Trad is a 2-channel power amplifier refined based on the Signature Edition 2150 SE, with a special specification featuring Robert Zeff’s signature. It’s designed for those who want to drive the left and right speakers firmly and draw out the fine nuances of music as well as the sense of spaciousness.

With factory audio or compact amplifiers, when you turn the volume up, the sound may become thinner, or the power in the low end may feel insufficient. The 2150 SE-Trad supports outputs of 150W×2 at 4Ω and 300W×2 at 2Ω. Because it can send signals to the speakers with more headroom, it aims to keep the sound from deteriorating even at higher volumes, and to help you create a sound where you can more easily perceive the core of the vocals and the initial attack of instruments.

It also supports a bridged connection of 600W×1 at 4Ω. Its appeal is not only that it can be used as a stereo amplifier for the front speakers, but also that—depending on the system configuration—alternative ways of using it can be considered. However, which connection method will actually suit you will vary depending on the overall setup, such as the speakers you use, the DSP, and the subwoofer.

An amplifier is not a product that produces the same sound just by installing it. The final result is determined by everything from power supply and wiring treatment, to installation methods, speaker pairing, and the tuning adjusted for the vehicle interior. At LOGON, rather than deciding based only on the performance of the product itself, we propose a practical configuration while confirming your current system and the music you typically listen to, the volume levels, and the direction of sound you want to achieve.

If you’re adding an amplifier, we want to aim for a finish where, when you listen to your usual tracks, you think, “So much detail was in the sound.” Let’s think together about whether the 2150 SE-Trad will suit your current vehicle, and which speakers or system combinations might work best—just check the vehicle specifications and we’ll go from there.

Key Specifications / Specs

【Basic Information】
Product name: 2150 SE-Trad
Brand: ARC Audio
Type: 2ch power amplifier

【Rated Output】
4Ω: 150W×2
2Ω: 300W×2
4Ω bridged: 600W×1

【Performance】
Frequency response: 7kHz～50kHz
Damping factor: over 2500

【Dimensions】
Approx. 393mm×203mm×63.5mm