This is a reference price as no car model has been selected.

Q & A

Q.

After installing the security system, is it okay to bring the vehicle to the dealer for inspections or vehicle inspections (shaken)?

A.

Yes, you can basically store the vehicle without any problem.

However, for vehicles equipped with a car security system, if left as-is, the alarm may go off during inspection or during the work for the vehicle inspection (shaken), so you’ll only need to take one extra step before bringing it in.

At LOGON, to ensure you won’t run into trouble when bringing the vehicle to a dealership or a maintenance workshop, we provide guidance on how to temporarily disable the security system in advance, as well as how to use it as needed.
As a result, even in your day-to-day use, you won’t have to deal with especially difficult procedures every time you get an inspection or vehicle inspection.

A common flow before bringing the vehicle in is:

  • Set the security system to the stop/disable mode
  • Check how to use the remote control
  • If necessary, tell the receiving location that the vehicle is equipped with a security system

If you keep these points in mind, things should go smoothly.

Also, since the operation methods may differ slightly depending on the vehicle model and installation details, at LOGON we also explain after installation in a way that you can actually use, including what to do in situations like these—so you know exactly how to respond.
This is often the part that first-time users of car security tend to feel anxious about, but by making it easy to understand, you can use it with confidence even after installation.

If you feel uneasy before bringing the vehicle in, it’s okay not to decide everything on your own.
If you tell us that you plan to take it to a dealership, we’ll provide clear guidance tailored to your situation.
Many people ask us about this, so please feel free to consult us even if it’s your first time.

Please also talk to us in advance if a dealership or another shop is going to fit new electrical equipment, not only for inspections and roadworthiness checks. For work such as adding factory options like rear monitors or interior lighting, replacing the battery, or removing interior trim, there are things we would like to pass on beforehand.

Contact us and we will put the points together in a form you can hand straight to whoever is doing the work. You do not need to carry out anything difficult yourself. Just let us know the planned date and what is being done.

If anything feels different from usual after the work, contact us as you are.

関連商品

TOR (Retrofit)

AUTHOR オーサーTOR (Retrofit)

SIREN BT (Retrofit)

AUTHOR オーサーSIREN BT (Retrofit)

TELE COMPASS (Retrofit, Subscription required separately)

AUTHOR オーサーTELE COMPASS (Retrofit, Subscription required separately)

2WAY answer back remote control J-216R (for Grgo-ZVII)

YUPITERUユピテル2WAY answer back remote control J-216R (for Grgo-ZVII)

Vehicle specific harness J-774

YUPITERUユピテルVehicle specific harness J-774

AUTHOR オーサーAUTHOR ALARM Key Fob Case

Answer-back remote control for Gorgo ZV2

GrgoゴルゴAnswer-back remote control for Gorgo ZV2

Panthera パンテーラ

Gorugo Remote Silicone Case - New Replacement

YUPITERUユピテルGorugo Remote Silicone Case - New Replacement

Panthera Remote Silicone Case - New Replacement

YUPITERUユピテルPanthera Remote Silicone Case - New Replacement

Security Main Harness 10Pin (For Gorugo / Panthera) (WA257)

YUPITERUユピテルSecurity Main Harness 10Pin (For Gorugo / Panthera) (WA257)

Security Main Harness 14Pin (For Gorugo / Panthera) (WA258)

YUPITERUユピテルSecurity Main Harness 14Pin (For Gorugo / Panthera) (WA258)

Security Sensor Harness 8Pin (For Gorugo / Panthera) (WA259)

YUPITERUユピテルSecurity Sensor Harness 8Pin (For Gorugo / Panthera) (WA259)

YUPITERUユピテルGenuine drive recorder interlocking set J-760

Remote control leather case J-106A

YUPITERUユピテルRemote control leather case J-106A